CSS Drop Down Menu by PureCSSMenu.com
Ash or Alder Body
21 Fret Neck (see neck options for type and sizes)
Single Action Trussrod
Bullet style Trussrod Adjustment
Nitrocellulose Finish on Headstock and Fretboard (maple)
Tru-Oil Finish on Back of Neck
Stainless Steel Frets
Your Choice of Porter Pickups *
Wilkinson VS-100N Tremolo Bridge
Gotoh Vintage Tuners
Bridge + Middle
Middle + Neck
MSRP: $2000 with case
A $750 deposit secures your order)
(plus shipping and sales tax
if CA resident)
* Other options available
To see Bobby Devito's review of a Saguaro Sedona guitar, click on the link below:
To see Talk Guitar Blog review of a Sedona guitar, click on the image below:
Retaining the body shape of a classic S shaped solid body electric, a Saguaro Sedona is 1.75" thick at the bottom strap button and being
wedge shaped, it tapers to about 0.800" thick at the upper strap button. This leaves a heel thickness of only 0.3" thick. The body is contructed of a two
piece top and two piece bottom. To give the thinner heel strength, inside the body is a 7075 aluminum "S Block".
The block ties the neck
joint to the bridge tremolo studs. To fit a standard sized tremolo block and springs, the back of a Sedona is carrved with a raised section or
trem bulge. The tremolo cover is recessed into the trem bulge.
At it's thickest point, the bulge only protrudes about 1/4" from the body.
The contours of the bulge seem to fit well with the tummy cut such that I do not notice it when holding the guitar. The tummy cut is much
smaller on a Sedona then a normal 1.75" thick body as the wedge shape reduces the need for it.
Below are several images showing a Saguaro Sedona body.